The AT6000D series offers excellent value for money and you are assured of excellent support
|
|
FEATURES
|
|
|
Records frequency employing a high-performance digital Synthesizer method
|
|
Measures wide frequency : 9 kHz ~ 3.0 GHz
|
|
Superior Resolution : Minimum 1 Hz
|
|
Compact and lightweight package
|
|
Pre Amp as standard
|
|
Wide Input Dynamic Range : -130 dBm ~ 20 dBm
|
|
Easy and simple Key Buttons
|
|
CDMA measurement functions : ACPR, ACLR, OBW, Channel Power
|
|
Resolution Bandwith(RBW) : 1 kHz ~ 3 MHz(1-3 Step), 9 kHz, 120 kHz
|
|
Simple usage and convenience 8 Markers, Trace function, Trigger function
|
|
Supports various types of convenient interface
|
|
GPIB(option), RS-232C(option), Printer(supports nearly all types of Printer)
|
|
REF in, REF out functions
|
|
Large capacity internal memory for storing measured data
|
|
Stores measured data up to 900 events
|
|
Stores Setup data up to 3,000 events
|
|
USB Host Port
|
|
Supports USB Printer
|
|
Stores data and applied Image file(GIF) into USB Flash memory
|
|
Ethernet Port and Software(option) for Internet remote control
|
|
|
FREQUENCY
|
Range
|
9kHz to 3.0GHz (AT6060D : 9kHz to 6.0GHz )
|
Resolution
|
Minimum 1Hz
|
Span Range
|
100 Hz/div to 300 MHz/div
Selection of 1, 2, 5 steps(automatic), ZERO Span, FULL Span (9KHz to 3.0GHz)
|
Frequency Selection
|
Start, Stop, Center, Span setup
|
pan Accuracy
|
±3% of the Indicated Span Width
|
Readout Accuracy
|
≤±(Indicated frequency × Reference frequency accuracy +Span
× Span accuracy +50% of RBW)
|
Phase Noise
|
≤-100dBc/Hz (@ 10kHz offset)
|
|
AMPLITUDE
|
Range
|
+20 dBm ~ -105 dBm, +20 dBm ~ -130 dBm(Pre Amp ON)
|
Average Noise Level (1kHz RBW, 10Hz VBW)
|
≤-105 dBm150 kHz ~ 2.7 GHz
≤-127 dBm(Pre Amp On) 20 MHz ~ 2.7 GHz
≤-100 dBm, -123 dBm(Pre Amp On) 2.7 GHz ~ 3 GHz
≤-130dBm(Pre Amp On) ; Typically
|
Amplitude Unit
|
dBm, dBmV, dB㎶, V, mV, ㎶, W, mW, uW
|
Display Scale linearity
|
≤ ±1.5 dB / 70 dB (10dB / div), ≤ ±1.5dB / 40dB (5dB / div)
≤ ±0.5 dB / 8 dB (1dB / div), ≤ ±0.5dB / 16dB (2dB / div)
|
Frequency Response (0 dB attenuation)
|
-3.5 ~ 1.5 dB (100kHz ~ 10MHz)
±1.5 dB (10MHz ~ 3GHz)
|
|
Reference Level
|
Range
|
-90 dBm to +20 dBm
|
Resolution
|
0.1 dB steps
|
Accuracy :
|
± 1.5 dB
|
Second Harmonic Distortion
|
≤-60 dBc, -40 dBm input
|
Inter-modulation Distortion
|
≤-70 dBc, -40 dBm input
|
Residual Spurious
|
≤-85 dBm (Input terminated, 0 dB attenuation)
|
Other Input Spurious
|
≤-60 dBc, -30 dBm input
|
|
Resolution Bandwidth
|
Selections
|
1kHz, 3kHz, 10kHz, 30kHz, 100kHz, 300kHz, 1MHz, 3MHz, 9kHz, 120kHz
|
Accuracy
|
≤ ±20%
|
Selectivity
|
60 dB / 3 dB ratio < 15 : 1
60 dB / 6 dB ratio < 12 : 1 (9 kHz, 120 kHz)
|
Switching Error
|
≤ ± 1.0 dB (1kHz Reference RBW)
|
Video Bandwidth
|
10 Hz to 3 MHz in 1-3-10 step
|
|
SWEEP
|
Rate
|
100 ms to 1000 sec,40ms to 1000sec(zero span)
|
Accuracy
|
≤ ±20%
|
Trigger Source
|
External(rear), Video, Free Run, Line
|
Trigger Modes
|
continuous, single
|
Trigger Level
|
TTL level
|
|
STORAGE
|
Trace Storage
|
maximum 900 waveforms
|
Setup Storage
|
maximum 3,000 states
|
|
SCREEN DISPLAY
|
Type
|
6.4" color TFT LCD
|
Display Resolution
|
640(H) x 480(V) active display area
|
Marker Modes
|
Peak search, Delta marker, Marker to Center, Marker to Reference (8 markers maximum)
|
|
INPUT
|
RF Input Connector
|
N-type Female, 50 ohm nominal
|
VSWR
|
150 kHz to 3.0 GHz, VSWR < 1.5 : 1(with 0 dBm Reference Level)
|
Maximum input level
|
0 Vdc, +20 dBm
|
|
STANDARD FREQUENCY (10MHZ, REF.)
|
Temperature Stability |
± 0.5 ppm
|
Aging |
± 0.5 ppm / Year
|
Connector |
BNC female
|
Input Level |
-5 dBm to +15 dBm
|
Output Level |
10 MHz, +8 dBm nominal
|
|
INTERFACE
|
Communication Port
|
RS-232C
|
Printer Driver
|
PCL Command, HP, EPSON,SAMSUNG,CANON Laser-Jet, Desk-Jet
|
Connector
|
for standard 25 pin female D-Sub parallel printer, supports USB
|
USB Host Printer Driver
|
PCL Command, HP, EPSON, SAMSUNG CANONLaser-Jet, Desk-Jet
|
USB Storage Device
|
Supports 1.1 and 2.0, for storing image file, supports GIF format
|
Ethernet(Option)
|
10-Base-T Ethernet, Supports internet remote control
|
GPIB Interface(Option)
|
IEEE488 bus
|
|
GENERAL SPECIFICATIONS
|
STORAGE TEMPERATURE:-20℃TO 70 ℃
RF EMISSIONS : EN 55011, FCC PART15 SECTION 15.101
RF IMMUNITY : EN 61326
SYSTEM SIZE : 350(W) X 195(H) X 370(D)MM
SYSTEM WEIGHT : 10KG
INPUT VOLTAGE : 100~240 VAC AT 50/60HZ
OPERATING TEMPERATURE : 0 ℃TO 40 ℃
|
|